Canon
PIXMA MP620
Macintosh Wireless Setup
For USB, Wired LAN and all Windows connections see Getting Started Guide.
Before starting please locate and write down your access point settings:
Network Name (also called SSID):
Network password (if applicable):
Photo All-In-One
series
Getting Started
Hardware Setup
=Read Me First=
1
Follow setup instruction on pages 2-8 of the Getting Started Guide
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
Wireless LAN Setup
2
4
3
1
2
5
(A)
Use the Easy-Scroll Wheel (A) or the
or
then press the OK button.
Select Device
settings, then press
the OK button.
Select LAN settings,
then press the OK
button.
Select Change
wireless/wired, then
press the OK button.
Select Wireless LAN
active, then press the
OK button.
button to select Settings,
Driver/Software Install
For information on setup when printing from multiple
computers, see the Getting Started Guide.
3
4
3
1
2
USB
Enter your Administrator
Name and Password.
Click OK.
Turn on the computer, then
insert the Setup CD-ROM into
the CD-ROM drive.
Double-click the Setup icon.
Connect one end of the USB cable
to the computer and the other to the
machine.
If you do not know your
administrator name or
If the CD-ROM folder does
not open automatically,
double-click the CANON_IJ
icon on the desktop.
password, click
.
Make sure the machine is turned on.
continue
For Users With Multiple Access Points
(For example: AirPort Extreme AND Time Capsule)
4
B
1
2
3
a. On the Canon IJ Network Tool
screen, select LAN connection
a. Select Setup in the drop down menu
b. Select MP620 series in Printers
c. Click OK
Click Manual Setup
b. Click OK
4
6
5
a. Enter the Network Name (SSID) that
a. Check the Authentication Type
b. Click Next
a. Enter your Passphrase
b. Click Next
you would like the printer to join
b. Choose your Encryption Method
from the drop down menu
c. Click Connect
7
8
9
Check the settings and click Finish
Click Connect
a. Turn off the printer
b. Disconnect the USB cable and
place the printer where it will be used
c. Turn the printer back on
d. Click Next
Proceed to section 5
Measure Wireless Performance
5
1
2
On the Connection Performance
Measurement dialog box, click
Next.
Confirm the measurement results,
then click Finish.
Ensure that
is displayed in
Connection performance between
the printer and the access point.
The Printer Setup Utility and Canon
IJ Network Scanner Selector will
start up.
To check whether the
new location is better,
click Remeasurement.
Measurement of the
communication status is
performed again.
Complete the Setup
6
1
2
3
a. Wait for a while, then select
Canon MP620 series
a. On the Canon IJ Network
Scanner Selector screen
select Canon MP620
a. Confirm that a check mark
b. Click Add
is displayed
b. Click Exit to close the dialog
box
series Network in TWAIN
The alphanumeric string after Canon
MP620 series is the machine's MAC
address.
Data Source Name and the
MAC address of the machine
in Network Device List
If the machine has not been detected,
make sure of the following.
b. Click Apply to use the
machine as a scanner
– The machine is turned on.
– The firewall function of any security
software is turned off.
– Wireless LAN Connection: The
computer is connected to the access
point.
– The machine is not set to use access
control (MAC address filtering).
Proceed to page 56 of the Getting Started
Guide, “Loading Paper”
Apple, AirPort Extreme, Macintosh and Time Capsule are
trademarks of Apple, Inc., registered in the U.S. and other
countries.
Getting Help from Canon
Call 1-800-828-4040
Monday - Friday (excluding holidays), during the warranty period
20081010-US-Web-V01
©CANON INC. 2008
PRINTED IN U.S.A.
|